Laboratory Test Specifications
Construction Water Testing
pH level, organic impurities, inorganic solids, sulfates, chlorides, and neutralizing alkalinity tests.
Governing Testing Standards:IS 456 (Clause 5.4)IS 3025BS 3148
Service Overview & Scope
Testing water suitability for concrete mixing and curing to prevent delayed setting, strength loss, and steel rebar corrosion.
Engineering Purpose
To verify that water used at batching plants and field sites meets chemical safety limits.
Key Civil Engineering Applications
Concrete Batching Plant Water Verification
Curing Water Suitability Audits
Borewell Water Chemical Assessment for Construction
Pre-stressed Concrete Water Quality Screening
Testing Methodology & Field Execution
1
Determination of pH value using calibrated electronic pH meter.
2
Gravimetric analysis of Total Suspended Solids (TSS) and Total Dissolved Solids (TDS).
3
Titration determination of Chlorides (Cl-) and Sulfates (SO3).
4
Neutralization tests for organic and inorganic impurities.
Laboratory & Field Equipment
Precision Digital pH & Conductivity Meter
Analytical Electronic Balance (0.1mg accuracy)
Muffle Furnace & Drying Oven
Titration Setup & Reagents
Engineering Significance
Protects concrete from strength drop, efflorescence, and premature internal rebar corrosion.
Deliverable Reports & Certificates
- Water Chemical Suitability Certificate
- Chloride & Sulfate Limit Assessment Report
- Concrete Mixing Clearance Document
Inquire For Construction Water Testing
Request a quotation, schedule site testing, or sample pickup.
Prefer direct phone contact?[ATLES PHONE 1]